Se rendre au contenu
CHF Liste de prix
  1. Tous les produits
  2. 24
  3. Full Kit, Starlex DHB D2.5x24 Inox Trempé BambuLab X1C Clone

Full Kit, Starlex DHB D2.5x24 Inox Trempé BambuLab X1C Clone

https://www.swiss3dc.com/web/image/product.template/499/image_1920?unique=250630f

Le thermistor est un clone conçu pour s'adapter au X1C
Les chauffages MCH ont des fils plus longs pour s'adapter à l'extrémité chaude Starlex DHB

Inclus:
1x Heat Sink modifié
1x HSC
1x Base Plate mini D4
1x Spring out
1x Base Heat Set (2x HB24, 2x HB Clamp24, 1x Clip 2.5, 1x Sock)
2x MCH Heaters 30W 24V
1x Thermistor NTC 100K 3950 gh1.25
1x Y Harness JST 2.54


Avertissement : Les buses en laiton et en cuivre ne s'adapteront pas à cette extrudeuse chaude !​

147.90 CHF 147.9 CHF 147.90 CHF Hors taxes

133.00 CHF Hors taxes

Not Available For Sale

  • Nozzle HSS output

Cette combinaison n'existe pas.

Contactez-nous
Kit D2.5 BambuLab HB D2.5x24 X1C Full Kit Drop-in


Conditions générales14 jours de retour, garantie de remboursement
Expédition : 2-7 jours ouvrables

Starlex DHB is a game changer for tool free nozzle swap in seconds.

No material leak as the extremity is located into the cold section, in the heat sink.

BambuLab Clone Heat Sink with HSC and Base Plate
Starlex DHB 2.5x24 Hotend Base Set 
2 MCH 24V 30W heaters and the NTC 100K 3950 Thermistor with JST 2.54 connector.

Choice of 1 HSS nozzle (output diameter)

Drop in replacement

1.75mm filament

Hardened Stainless Steel nozzles 650 HV (HSS)

Simplified connections with 2x30W MCH  heaters and integrated Thermistor


2.5mm nozzles are made of stainless steel, hardened to support abrasive filaments and high temperatures.

​They are 2.5mm outer diameter to reduce the thermal barrier due to lower thermal conduction of the metal used. Heat blocks must also be 2.5mm

​Light increase of standard temperature can be needed to keep up with flow rate.

​Some specifically abrasive filaments will significantly wear over time hardened nozzle.

3.0mm nozzles are made of brass and copper. Very conductive materials, also weaker in abrasion matters without coating. Great for PLA, PetG and similar filaments.

​They are 3.0mm outer diameter, heat blocks also need to be 3mm

They need to have the corresponding heat blocks.

Complete the Hot-end with the adapted parts below