Skip to Content
CHF Price list
  1. All Products
  2. 24
  3. Full Kit, Starlex DHB D2.5x24 Hardened Stainless Steel BambuLab X1C Clone

Full Kit, Starlex DHB D2.5x24 Hardened Stainless Steel BambuLab X1C Clone

https://www.swiss3dc.com/web/image/product.template/499/image_1920?unique=250630f

This complete Drop In replacement kit lets you change nozzles in seconds.
The Thermistor is a clone to fit the X1C
The MCH heaters have longer wires to fit the Starlex DHB Hot-end

Included:
1x Heat Sink modified
1x HSC
1x Base Plate mini D4 
1x Base Heat Set (2x HB24, 2x HB Clamp24, 1x Clip 2.5, 1x Sock)
2x MCH Heaters 30W 24V
1x Thermistor NTC 100K 3950 gh1.25
1x Y Harness JST 2.54


Warning Brass & Copper nozzles will not fit into this hot-end!

147.90 CHF 147.9 CHF 147.90 CHF Tax Excluded

133.00 CHF Tax Excluded

Not Available For Sale

  • Nozzle HSS output

This combination does not exist.

Contact Us
Kit D2.5 BambuLab HB D2.5x24 X1C Full Kit Drop-in


Terms and Conditions
14 days return, money-back guarantee
Shipping: 2-7 Busin​ess Days​

Starlex DHB is a game changer for tool free nozzle swap in seconds.

No material leak as the extremity is located into the cold section, in the heat sink.

BambuLab Clone Heat Sink with HSC and Base Plate
Starlex DHB 2.5x24 Hotend Base Set 
2 MCH 24V 30W heaters and the NTC 100K 3950 Thermistor with JST 2.54 connector.

Choice of 1 HSS nozzle (output diameter)

Drop in replacement

1.75mm filament

Hardened Stainless Steel nozzles 650 HV (HSS)

Simplified connections with 2x30W MCH  heaters and Thermistor


2.5mm nozzles are made of stainless steel, hardened to support abrasive filaments and high temperatures.

​They are 2.5mm outer diameter to reduce the thermal barrier due to lower thermal conduction of the metal used. Heat blocks must also be 2.5mm

​Light increase of standard temperature can be needed to keep up with flow rate.

​Some specifically abrasive filaments will significantly wear over time hardened nozzle.

3.0mm nozzles are made of brass and copper. Very conductive materials, also weaker in abrasion matters without coating. Great for PLA, PetG and similar filaments.

​They are 3.0mm outer diameter, heat blocks also need to be 3mm

They need to have the corresponding heat blocks.

Complete the Hot-end with the adapted parts below