Skip to Content
CHF Price list
  1. All Products
  2. Full Kit, Starlex DHB D3x24 Brass / Copper BambuLab X1C Clone 2x MCH 24V Heaters 24/30W

Full Kit, Starlex DHB D3x24 Brass / Copper BambuLab X1C Clone 2x MCH 24V Heaters 24/30W

https://www.swiss3dc.com/web/image/product.template/509/image_1920?unique=5335f60

Included:

1x Heat Sink modified
1x HSC
1x Base Plate mini D4
1x Base Heat Set (2x HB24, 2x HB Clamp24, 1x Clip 3.0, 1x Sock)
2x MCH 24V Heaters 24/30W
1x Thermistor NTC 100K 3950 gh1.25
1x Y Harness JST 2.54


This kit is not compatible with the 2.5 Hardened Stainless Steel Nozzles

Warning D2.5 HSS  nozzles will not fit into this hot-end!

147.90 CHF 147.9 CHF 147.90 CHF Tax Excluded

135.00 CHF Tax Excluded

Not Available For Sale

  • Nozzle D3x24 Brass / Copper
  • Nozzle Brass output
  • MCH Wattage
  • MCH Heater Connector Type
  • MCH heater quantity

This combination does not exist.

Contact Us
HB24 D3 Kit BambuLab X1C Full Kit Drop-in
Nozzle D3x24 Brass / Copper: Brass
MCH Heater Connector Type: JST XH 2.54
MCH heater quantity: 2x


Terms and Conditions
14 days return, money-back guarantee
Shipping: 2-7 Busin​ess Days​

Starlex DHB is a game changer for tool free nozzle swap in seconds.

No material leak as the extremity is located into the cold section, in the heat sink.

BambuLab Clone Heat Sink with HSC and Base Plate
Starlex DHB D3x24 Hotend Base Set 
2 MCH 24V Heaters  24/30W and the NTC 100K 3950 Thermistor with JST 2.54 connector.

Choice of Brass nozzle

Drop in replacement

1.75mm filament

Brass or Copper Nozzle D3x24

Simplified harness connections with 2x 24V Heaters  24/30W MCH  and Thermistor


2.5mm nozzles are made of stainless steel, hardened to support abrasive filaments and high temperatures.

​They are 2.5mm outer diameter to reduce the thermal barrier due to lower thermal conduction of the metal used. Heat blocks must also be 2.5mm

​Light increase of standard temperature can be needed to keep up with flow rate.

​Some specifically abrasive filaments will significantly wear over time hardened nozzle.

3.0mm nozzles are made of brass and copper. Very conductive materials, also weaker in abrasion matters without coating. Great for PLA, PetG and similar filaments.

​They are 3.0mm outer diameter, heat blocks also need to be 3mm

They need to have the corresponding heat blocks.

Complete the Hot-end with the adapted parts below