Full Kit, Starlex DHB D2.5-22.5-0.4mm Ender3_V2 Upgrade
Complete Starlex DHB 2.5-22.5 assembly
Includes:
1x Ender3_V2 + Adapted HS + Spring In - HS Base Set M6
1x Starlex DHB D2.5x22.5 Hot-end Base Set Only
1x Set 2x MCH Heater 30W 24V JST 2.54 + Harness JST 2.54
1x Nozzle D2.5x22.5 Hardened Stainless Steel (0.4mm)
1x Screw 4 pins connector m-f
1x Bowden connector
Images are not contractual
Enjoy the higher flow rate, thanks to the longer 22.5mm Nozzle length which equals to 22mm3/s melt zone length within the same Nozzle height.
1x Ender3_V2 + Adapted HS + Spring In - HS Base Set M6
1x Starlex DHB D2.5x22.5 Hot-end Base Set Only
1x Set 2x MCH Heater 30W 24V JST 2.54 + Harness JST 2.54
1x Nozzle D2.5x22.5 Hardened Stainless Steel (0.4mm)
1x Screw 4 pins connector m-f
1x Bowden connector
Images are not contractual
Enjoy the higher flow rate, thanks to the longer 22.5mm Nozzle length which equals to 22mm3/s melt zone length within the same Nozzle height.
Conditions générales14 jours de retour, garantie de remboursement
Expédition : 2-7 jours ouvrables
Complete the Hot-end with the adapted parts below
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.