Shop | Swiss3Dc

Starlex DHB Shop

Heat sink

Redefined heat sinks length are designed to accommodate the additional height introduced by the system keeping the original overall length.

Heat blocks

Heat blocks are available in three lengths: 22.5mm, 24mm, and 33mm and two diameters, 2.5 and 3mm depending on the Nozzle material. Heater & thermistor NOT included.

Nozzles

Choose the nozzle with corresponding length and diameter, in Hardened Stainless Steel, Brass or Copper.

Heaters & Connectors Choose one or two heaters for the heat blocks with the matching connectors for your printer and bulb thermistor.

BrandsView available parts by brands

Heaters & Connectors

Modified
Heat Sink Connector Spacer (HSCS)
Heat Sink Connector (HSC)
Cold Set

Available Modified Heat Sinks

For an easy Drop In replacement.

Find below a few available modified heat sinks in stock, that would be mounted usually with a Starlex DHB 22.5 Hot-end, except for BambuLab X1c, P1P-P1S, where a Starlex DHB 24 Hot-end is implemented, more to come over time.

Do not hesitate to fill a request form for other heat sinks specifications, we would be happy to help.

https://www.swiss3dc.com/special-request

Modified heat sink

To suite most printer setups, when changing your original hot-end to the Starlex DHB Eco-system, you will have the choice to select a modified heat sink and the short DHB 22.5mm nozzle to fit the same nozzle height, with normally no other mechanical changes.

Existing heat sink

Or, add the Starlex DHB Nozzle with various nozzle length onto the existing heat sink / extruder. This option will increase the hotend height of a few mm, the need to redesign your fan shroud, adapt Z height accordingly but will also increase highly the melt zone for a similar height.

HS Ender3_V2 Adapted Heat Sink only (DHB22.5) Adapted Length Heat Sink Only for DHB22.5 21.90 CHF 21.9 CHF	HS Sprite Adapted Heat Sink only (DHB22.5) Sprite Heat Sink Only with M4 thread to integrate the Starlex Dual Heat Block 28.90 CHF 28.9 CHF	HS E3D V6 M12 Adapted Heat Sink Only (DHB 22.5) 18.90 CHF 18.9 CHF	HS E3D V6 Groove Adapted Heat Sink Only (DHB22.5) For a Drop in Replacement hotend, same height with DHB 22.5 17.90 CHF 17.9 CHF
HS Prusa Mini Adapted Heat Sink only (DHB22.5) Modified Original Prusa Mini Heat Sink only 36.00 CHF 36.0 CHF	HSCS D4 Plate Spacer Aluminium machined spacer plate 6.50 CHF 6.5 CHF	HSCS D4 Revo Spacer Adapted for Revo M4 mounting Heat Sink or Extruder with the spring groove. 3.50 CHF 3.5 CHF	HSCS D6 Plate Spacer Aluminium machined spacer plate 6.50 CHF 6.5 CHF
HSCS D6xD7 tube Spacer Brass tube spacer 3.50 CHF 3.5 CHF	HSCS D7 Plate Spacer Aluminium machined spacer plate 6.50 CHF 6.5 CHF	HSC for E3D M4 Revo/Hemera Heat Sink Connector for E3D M4 systems 11.40 CHF 11.4 CHF	HSC M4 x 10 Hex 6mm 8.90 CHF 8.9 CHF
HSC D6S Long add on for Bondtech LGX 10.70 CHF 10.7 CHF	HSC BiQu D6 8.90 CHF 8.9 CHF	HSC M6x15 L Bowden 8.90 CHF 8.9 CHF	HSC M6 x 15 L 8.90 CHF 8.9 CHF
HSC D6x16.5 Compatible with most long HS 3D printer brands (K1, Kobra, V6 D7, ...) with Heat Break Tube D6x16.5mm Check the size of your heat break tube before ordering. HSC must be same diameter, but can slightly shorter than original heat break tube, bowden tube will compensate height. 7.90 CHF 7.9 CHF	HSC M7 x 10 L 8.90 CHF 8.9 CHF	HSC D7S Ender HS 7.90 CHF 7.9 CHF	HSC M7 x 15 7.90 CHF 7.9 CHF

All Swiss3Dc designed parts are made and CNC machined in Switzerland, standard parts can be imports.

The colors of the parts on the images in the shop and on the website are for differentiation purposes only.

WARNING ⚠️: Some products sold on this website can expose you to chemicals, including Mineral Oils, which is known to the State of California to cause cancer, also Lead and Nickel, that are known to the State of California to cause cancer and birth defects or other reproductive harm. More information: https://www.p65warnings.ca.gov/