Full Kit, Prusa Mini Starlex DHB D3.0x22.5 base set, 4x Set Buses Laiton, 2x MCH Heater 24W 24V Microfit 3.0, 1x Thermistor NTC 100K 3950 Microfit 3.0 Replacement Standard
Pour un changement facile, le dissipateur thermique a été modifié pour intégrer le Starlex DHB 22.5mm.
Le câblage devra être adapté pour le chauffage (2x30W) et la thermistance (NTC 100K 3950 - JST gh1.25).
Le support plastique du ventilateur peut être réimprimé, ou modifié, DIY
Always bring both MCH wires to the back horizontally, give them enough space to move freely !
Do not forget to print the STL file below.
Both heater wires will come to the right, behind the gap of the heat sink and the thermistor wire also to the right. The heater wires should never be locked, they must have as much freedom as possible to avoid forcing on the soldering point.
Do not forget to print the STL file below.
Both heater wires will come to the right, behind the gap of the heat sink and the thermistor wire also to the right. The heater wires should never be locked, they must have as much freedom as possible to avoid forcing on the soldering point.
Documents
Conditions générales14 jours de retour, garantie de remboursement
Expédition : 2-7 jours ouvrables
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.