Se rendre au contenu
CHF Liste de prix
  1. Tous les produits
  2. Ensemble chaud
  3. Starlex DHB D3x22.5 Hot-end Full Kit (Hot Section)

Starlex DHB D3x22.5 Hot-end Full Kit (Hot Section)

https://www.swiss3dc.com/web/image/product.template/719/image_1920?unique=eaf4683

Content:
2x HB 3.0x22.5;
2x HB 22.5 Clamp;
1x Clip 3.0;
1x Silicone Sock;

+ selected items below

NOT INCLUDED: HS, HSC, HSCS, Base Plate
Images are not contractual

 Hot Section. This pre-mounted Kit Starlex DHB D3x22.5 Hot-end is an easy drop in replacement hot section parts only with Microfit 3.0 connectors, 2x 24/30W 24V MCH Heaters, NTC 100K 3950 Thermistor and a Brass D3x22.5 Nozzle 0.4mm

Cold section to select separately. (HS, HSC, HSCS, Base Plate)

89.90 CHF 89.9 CHF 89.90 CHF Hors taxes

89.90 CHF Hors taxes

Not Available For Sale

  • MCH heater quantitE
  • MCH Puissance en Watt
  • MCH Heater Connector Type
  • MCH Voltage
  • MCH Y Harness Connector (for 2 MCH Heaters = 60W max)
  • Thermistor NTC 100K 3950 bulb 1.3mm (100mm wire)
  • Wires From Hot-end Microfit To Board 1m
  • Buse D3-22.5 laiton/ cuivre

Cette combinaison n'existe pas.

Contactez-nous
MCH heater quantitE​ 2x
MCH Heater Connector Type​ Microfit3.0
MCH Voltage​ 24V
MCH Y Harness Connector (for 2 MCH Heaters = 60W max)​ Microfit3.0
Thermistor NTC 100K 3950 bulb 1.3mm (100mm wire)​ Microfit 3.0 Bulb
Wires From Hot-end Microfit To Board 1m​ 2 Microfit cables 1m


Conditions générales14 jours de retour, garantie de remboursement
Expédition : 2-7 jours ouvrables

Images are not contractual !

This Starlex DHB Hotend configurator for the 22.5mm nozzle length permits you to select the Hot end parts as much as possible to adapt the Starlex DHB to your 3D Printer.

Connectors wise is important, we do not have all options available in the market, but by selecting with JST 2.54, Microfit 3.0 or none, on your side you can cut the wires and adapt your own connector, or add the screw 4 pins connector available on the shop.