Se rendre au contenu
CHF Liste de prix
  1. Tous les produits
  2. Full Kit  BambuLab X1C-P1P-P1S, Starlex DHB D3x33 Base set, Set of 4 HSSC Nozzles, 2x MCH 24V Heaters 30W, Thermistor, adapted connectors
Special Kit Offer
Full Kit  BambuLab X1C-P1P-P1S, Starlex DHB D3x33 Base set, Set of 4 HSSC Nozzles, 2x MCH 24V Heaters 30W, Thermistor, adapted connectors

Full Kit  BambuLab X1C-P1P-P1S, Starlex DHB D3x33 Base set, Set of 4 HSSC Nozzles, 2x MCH 24V Heaters 30W, Thermistor, adapted connectors

https://www.swiss3dc.com/web/image/product.template/760/image_1920?unique=db3e08c

Sélectionnez le diamètre sortie buse, le chauffage 24/30W...

Go from 24mm melt zone to a majestic 33mm melt zone within the same space, no heat creep.

This amazing Drop In replacement full kit will bring you the ease of D3x33 nozzle change over in seconds, tool free within your original hot-end space. No more hassle with connectors, tools and screws. 

(Compatible for BambuLab printers with adapted Heat Sink DHB33)

Included: 

1x Heat Sink modified

1x HSC

1x Base Plate mini D4

1x Base Heat Set (2x HB D3.0x33, 2x HB Clamp33, 1x Clip 3.0, 1x Sock)

2x MCH 24V Heaters 30W 1x Selected Thermistor


129.00 CHF 129.0 CHF 129.00 CHF Hors taxes

129.00 CHF Hors taxes

Not Available For Sale

  • Thermistors - Heaters

Cette combinaison n'existe pas.

Contactez-nous


Conditions générales14 jours de retour, garantie de remboursement
Expédition : 2-7 jours ouvrables

Starlex DHB is a game changer for tool free nozzle swap in seconds.

No material leak as the extremity is located into the cold section, in the heat sink.

BambuLab Clone Heat Sink with HSC and Base Plate
Starlex DHB D3x33 Hotend Base Set 
2 MCH 24V 30W heaters and the selected Thermistor with corresponding connector.

Set of 4 HSSC nozzles 0.2/0.4/0.6/0.8mm

Brass nozzles are also available for this setup.

Drop in replacement

1.75mm filament

HSSC D3.0 Nozzle

Brass 3.0 Nozzles also available for this configuration

MCH Heater 24V, 2x 60W MCH  heaters and Thermistor



Hardened Stainless Steel (HSS) Nozzles are 2.5mm HSS with a Copper sleeve to reach the 3.0mm outer diameter = HSSC Nozzles.

Light increase of standard temperature (+5 to 10°C) can be needed to keep up with flow rate or more depending on your filament quality.

They will fit on the Heat Blocks 3.0mm only.


Complete the Hot-end with the adapted parts below