Se rendre au contenu
CHF Liste de prix
  1. Tous les produits
  2. Kit Personnalisable, BambuLab X1C Clone, Starlex DHB D3x24 Base set, Brass Nozzle, 2x MCH 24V Heaters 24/30W, Thermistor

Kit Personnalisable, BambuLab X1C Clone, Starlex DHB D3x24 Base set, Brass Nozzle, 2x MCH 24V Heaters 24/30W, Thermistor

https://www.swiss3dc.com/web/image/product.template/509/image_1920?unique=2c3628a

Sélectionnez le diamètre sortie buse, le chauffage 24/30W...

Included:

1x Heat Sink modified
1x HSC
1x Base Plate mini D4
1x Base Heat Set (2x HB24, 2x HB Clamp24, 1x Clip 3.0, 1x Sock)
2x MCH 24V Heaters 24/30W
1x Thermistor NTC 100K 3950 gh1.25
1x Y Harness JST 2.54


This kit is not compatible with the 2.5 Hardened Stainless Steel Nozzles 

97.80 CHF 97.8 CHF 97.80 CHF Hors taxes

84.90 CHF Hors taxes

Not Available For Sale

  • Nozzle D3x24 Brass
  • Nozzle Brass output
  • MCH Puissance en Watt
  • MCH Heater Connector Type
  • MCH heater quantitE

Cette combinaison n'existe pas.

Contactez-nous
Nozzle D3x24 Brass​ Brass
MCH Heater Connector Type​ JST XH 2.54
MCH heater quantitE​ 2x


Conditions générales14 jours de retour, garantie de remboursement
Expédition : 2-7 jours ouvrables

Starlex DHB is a game changer for tool free nozzle swap in seconds.

No material leak as the extremity is located into the cold section, in the heat sink.

BambuLab Clone Heat Sink with HSC and Base Plate
Starlex DHB D3x24 Hotend Base Set 
2 MCH 24V 30W heaters and the NTC 100K 3950 Thermistor with JST 2.54 connector.

Choice of Brass nozzle

Drop in replacement

1.75mm filament

Brass or Copper Nozzle D3x24

Simplified harness connections with 2x 24V Heaters  24/30W MCH  and Thermistor

BambuLab 3D Printer does support 40 to 60W heaters, it's your choice.

2.5mm nozzles are made of stainless steel, hardened to support abrasive filaments and high temperatures.

​They are 2.5mm outer diameter to reduce the thermal barrier due to lower thermal conduction of the metal used. Heat blocks must also be 2.5mm

​Light increase of standard temperature can be needed to keep up with flow rate.

​Some specifically abrasive filaments will significantly wear over time hardened nozzle.

3.0mm nozzles are made of brass and copper. Very conductive materials, also weaker in abrasion matters without coating. Great for PLA, PetG and similar filaments.

​They are 3.0mm outer diameter, heat blocks also need to be 3mm

They need to have the corresponding heat blocks.

Complete the Hot-end with the adapted parts below