%20(0.4,%2024WxL15)?unique=a26905d){kind=icon}
?unique=052b46e)
%20Sprite%20Cold%20section?unique=7fe0fc5){kind=icon}
?unique=019c049){kind=icon}
?unique=019c049){kind=icon}
?unique=019c049){kind=icon}
%20(0.4,%2024WxL15)?unique=a26905d){kind=icon}
?unique=052b46e)
%20Sprite%20Cold%20section?unique=7fe0fc5){kind=icon}
?unique=019c049){kind=icon}
?unique=019c049){kind=icon}
?unique=019c049){kind=icon}
Kit Personnalisable Creality Sprite S1, Starlex DHB D2.5x22.5 HSS ( Thermistor NTC 100K 3950 JST xh1.25)
Choisissez votre diamètre de sortie de buse, de chauffage 24/30W..
1x Nozzle Hardened Stainless Steel 0.4mm
2x MCH 2x30W 24V JST + Y connector
1x Thermistor bulb NTC 100K 3950 JST xh 1.25 connector
To print by user, plastic air flow guide
Enjoy the especially redesigned light Heat Sink to fit a similar height (+0.8mm) with a 22.5mm melting zone nozzle, highly increasing your print speed and flow rate.
This kit is not compatible with the 3.0 Brass Nozzles
Warning D3.0 Brass & Copper nozzles will not fit into this hot-end!Documents
Conditions générales14 jours de retour, garantie de remboursement
Expédition : 2-7 jours ouvrables
Complete the Hot-end with the adapted parts below
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.