,%202x,%2024WxL15,%20Microfit3.0,%20Microfit3.0,%200.4mm)?unique=0c8073c)
,%202x,%2024WxL15,%20Microfit3.0,%20Microfit3.0,%200.4mm)?unique=0c8073c)
Kit Personnalisable, Prusa Mini DHB D3x22.5 Replacement Standard
Pour un changement facile, le dissipateur thermique a été modifié pour intégrer le Starlex DHB 22.5mm.
Le câblage devra être adapté pour le chauffage (2x30W) et la thermistance (NTC 100K 3950 - JST gh1.25).
Le support plastique du ventilateur peut être réimprimé, ou modifié, DIY
For an easy change over, the original heat sink (Most expensive part!) has been modified to integrate the Starlex DHB 22.5mm.
Wiring will need to be adapted for Heater (2x30W) and Thermistor (NTC 100K 3950 - JST gh1.25)
Easiest upgrade, use a 4pins screw connector.
Plastic fan support can be reprinted, or modified, DIY, link below.
This upgrade will greatly enhance the melt zone similar to a Volcano nozzle while preserving the original height.
No other mechanical modifications necessary.
Wiring will need to be adapted for Heater (2x30W) and Thermistor (NTC 100K 3950 - JST gh1.25)
Easiest upgrade, use a 4pins screw connector.
Plastic fan support can be reprinted, or modified, DIY, link below.
This upgrade will greatly enhance the melt zone similar to a Volcano nozzle while preserving the original height.
No other mechanical modifications necessary.
Documents
Conditions générales14 jours de retour, garantie de remboursement
Expédition : 2-7 jours ouvrables
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.