Se rendre au contenu
CHF Liste de prix
  1. Tous les produits
  2. kit personnalisable
  3. Kit Personnalisable, Starlex DHB D2.5x24 Inox Trempé pour BambuLab P1P-P1S Clone

Kit Personnalisable, Starlex DHB D2.5x24 Inox Trempé pour BambuLab P1P-P1S Clone

https://www.swiss3dc.com/web/image/product.template/504/image_1920?unique=57a8949

Sélectionnez le diamètre sortie buse, le chauffage 24/30W...

This Drop In replacement full kit will bring you the ease of D3x24 nozzle change over in seconds, tool free. No more hassle with connectors and screws

Included: 

1x Heat Sink modified

1x HSC

1x Base Plate mini D4

1x Base Heat Set (2x HB D2.5x24, 2x HB Clamp24, 1x Clip 2.2, 1x Sock)

2x MCH 24V Heaters 24/30W 1x Thermistor NTC 100K 3950 in one connector

This Kit is not compatible with the D3x24 Brass / Copper nozzles.

​

99.80 CHF 99.8 CHF 99.80 CHF Hors taxes

84.90 CHF Hors taxes

Not Available For Sale

  • Buses HSS diamètre de sortie
  • MCH Puissance en Watt

Cette combinaison n'existe pas.

Contactez-nous


Conditions générales14 jours de retour, garantie de remboursement
Expédition : 2-7 jours ouvrables

Starlex DHB is a game changer for tool free nozzle swap in seconds.

No material leak as the extremity is located into the cold section, in the heat sink.

BambuLab Clone Heat Sink with HSC and Base Plate
Starlex DHB 2.5x24 Hotend Base Set 
2 MCH 24V 30W heaters and the NTC 100K 3950 Thermistor with special connector.

Choice of HSS nozzle

Drop in replacement

1.75mm filament

Hardened Stainless Steel nozzles 650 HV (HSS)

Simplified connections with 2x30W MCH  heaters and integrated Thermistor

BambuLab 3D Printer does support 40 to 60W heaters, it's your choice.

2.5mm nozzles are made of stainless steel, hardened to support abrasive filaments and high temperatures.

​They are 2.5mm outer diameter to reduce the thermal barrier due to lower thermal conduction of the metal used. Heat blocks must also be 2.5mm

​Light increase of standard temperature can be needed to keep up with flow rate.

​Some specifically abrasive filaments will significantly wear over time hardened nozzle.

3.0mm nozzles are made of brass and copper. Very conductive materials, also weaker in abrasion matters without coating. Great for PLA, PetG and similar filaments.

​They are 3.0mm outer diameter, heat blocks also need to be 3mm

They need to have the corresponding heat blocks.

Complete the Hot-end with the adapted parts below