,%202x,%2024WxL15,%20Microfit3.0,%200.4mm,%20Microfit3.0)?unique=ff7ce30)
,%202x,%2024WxL15,%20Microfit3.0,%200.4mm,%20Microfit3.0)?unique=ff7ce30)
Kit Personnalisable Starlex DHB D3.0-22.5 Ender3_V2 Upgrade
Choisissez votre diamètre de sortie de buse, de chauffage 24/30W...
Includes:
1x Ender3_V2 + Adapted HS + Spring In - HS Base Set M6
1x Starlex DHB D3.0x22.5 Hot-end Base Set Only
1x Bowden connector
Complete with items below
JST xh 1.25 connector would be found in Creality and other printers
JST gh 1.25 connector is the one found in the BBL X1c
Images are not contractual
Enjoy the higher flow rate, thanks to the longer 22.5mm Nozzle length which equals to 22mm3/s melt zone length within the same Nozzle height.
1x Ender3_V2 + Adapted HS + Spring In - HS Base Set M6
1x Starlex DHB D3.0x22.5 Hot-end Base Set Only
1x Bowden connector
Complete with items below
JST xh 1.25 connector would be found in Creality and other printers
JST gh 1.25 connector is the one found in the BBL X1c
Images are not contractual
Enjoy the higher flow rate, thanks to the longer 22.5mm Nozzle length which equals to 22mm3/s melt zone length within the same Nozzle height.
Conditions générales14 jours de retour, garantie de remboursement
Expédition : 2-7 jours ouvrables
Complete the Hot-end with the adapted parts below
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.