?unique=7e66354)
?unique=7e66354)
Starlex DHB D3.0x24 Hotend Full Kit (Hot Section)
Content:
2x HB 3.0x24;
2x HB 24 Clamp;
1x Clip 3.0;
1x Silicone Sock;
+ items below
NOT INCLUDED: HS, HSC, HSCS, Base Plate
Images are not contractual
Hot Section. This pre-mounted Kit Starlex DHB D3x24 Hot-end is an easy drop in replacement hot section parts only with Microfit 3.0 connectors, 2x 24W 24V MCH Heaters, NTC 100K 3950 Thermistor and a Brass D3x24 Nozzle 0.4mm
Cold section to select separately. (HS, HSC, HSCS, Base Plate)
| MCH heater quantitE 2x |
| MCH Puissance en Watt 24WxL15 |
| MCH Heater Connector Type Microfit3.0 |
| MCH Voltage 24V |
| MCH Y Harness Connector (for 2 MCH Heaters = 60W max) Microfit3.0 |
| Thermistor NTC 100K 3950 bulb 1.3mm (100mm wire) Microfit 3.0 Bulb |
| Wires From Hot-end Microfit To Board 1m 2 Microfit cables 1m |
Conditions générales14 jours de retour, garantie de remboursement
Expédition : 2-7 jours ouvrables
Images are not contractual !
This Starlex DHB Hotend configurator for the 22.5mm nozzle length permits you to select the Hot end parts as much as possible to adapt the Starlex DHB to your 3D Printer.
Connectors wise is important, we do not have all options available in the market, but by selecting with JST 2.54, Microfit 3.0 or none, on your side you can cut the wires and adapt your own connector, or add the screw 4 pins connector available on the shop.