Skip to Content

Starlex DHB D3x22.5 Hot-end Full Kit (Hot Section)

https://www.swiss3dc.com/web/image/product.template/719/image_1920?unique=6cc510e

Content:
2x HB 3.0x22.5;
2x HB 22.5 Clamp;
1x Clip 3.0;
1x Silicone Sock;

+ selected items below

NOT INCLUDED: HS, HSC, HSCS, Base Plate
Images are not contractual

 Hot Section. This pre-mounted Kit Starlex DHB D3x22.5 Hot-end is an easy drop in replacement hot section parts only with Microfit 3.0 connectors, 2x 24/30W 24V MCH Heaters, NTC 100K 3950 Thermistor and a Brass D3x22.5 Nozzle 0.4mm

Cold section to select separately. (HS, HSC, HSCS, Base Plate)

89.90 CHF 89.9 CHF 89.90 CHF Tax Excluded

89.90 CHF Tax Excluded

Not Available For Sale

  • MCH heater quantity
  • MCH Wattage
  • MCH Heater Connector Type
  • MCH Voltage
  • MCH Y Harness Connector (for 2 MCH Heaters = 60W max)
  • Thermistor NTC 100K 3950 bulb 1.3mm (100mm wire)
  • Wires From Hot-end Microfit To Board 1m
  • Nozzle D3x22.5 brass

This combination does not exist.

MCH heater quantity: 2x
MCH Heater Connector Type: Microfit3.0
MCH Voltage: 24V
MCH Y Harness Connector (for 2 MCH Heaters = 60W max): Microfit3.0
Thermistor NTC 100K 3950 bulb 1.3mm (100mm wire): Microfit 3.0 Bulb
Wires From Hot-end Microfit To Board 1m: 2 Microfit cables 1m


Terms and Conditions
14 days return, money-back guarantee
Shipping: 2-7 Business Days

Images are not contractual !

This Starlex DHB Hotend configurator for the 22.5mm nozzle length permits you to select the Hot end parts as much as possible to adapt the Starlex DHB to your 3D Printer.

Connectors wise is important, we do not have all options available in the market, but by selecting with JST 2.54, Microfit 3.0 or none, on your side you can cut the wires and adapt your own connector, or add the screw 4 pins connector available on the shop.