Shop | Swiss3Dc

HS Ender3_V2 Adapted Heat Sink only (DHB22.5) Adapted Length Heat Sink Only for DHB22.5 21.90 CHF 21.9 CHF	HS Sprite Adapted Heat Sink only (DHB22.5) Sprite Heat Sink Only with M4 thread to integrate the Starlex Dual Heat Block 28.90 CHF 28.9 CHF	HS E3D V6 M12 Adapted Heat Sink Only (DHB 22.5) 18.90 CHF 18.9 CHF	HS E3D V6 Groove Adapted Heat Sink Only (DHB22.5) For a Drop in Replacement hotend, same height with DHB 22.5 17.90 CHF 17.9 CHF
HS Prusa Mini Adapted Heat Sink only (DHB22.5) Modified Original Prusa Mini Heat Sink only 36.00 CHF 36.0 CHF	Spring In NOT FOR Shaped Base plate Mini Series D4 - D6 1.50 CHF 1.5 CHF	HSC for Prusa Mini D5.5 11.10 CHF 11.1 CHF	Base Plate Set M4 Revo + Spacer + Spring In Revo M4 HSC Base Plate D4 Rounded & Tube Spacer 21.90 CHF 21.9 CHF
Base Plate Set D6S for Bondtech LGX + Spacer + Spring In Base Set includes: Base plate D6L HSCS D6 plate HSC D6L Spring in 21.90 CHF 21.9 CHF	Base Plate Set D6S for BiQu V2 + Spacer + Spring In 21.90 CHF 21.9 CHF	Base Plate Set M7S x 15 + Spacer + Spring In M7S = Base plate D7 + HSC thread M7 + Spacer HSCS D7 + Spring 21.90 CHF 21.9 CHF	Base Plate Set D7S + Spacer + Spring In 21.90 CHF 21.9 CHF
Base Plate Set D7 (for Ender3_V2 Original HS) + Spring In 21.90 CHF 21.9 CHF	Base Plate Set M7S for E3D V6 Original HS + Spacer + Spring In This Base Set will fit into an original V6 Heat Sink. It will increase 7mm the Nozzle height, fan shroud will need to be adapted. The electrical wiring will need to be adapted to support the 2x30W MCH heaters and the Thermistor (NTC 100K 3950 - JST gh1.25). 21.90 CHF 21.9 CHF	Base Plate Set Round M7S x 10 + Spacer + Spring In M7S = Base plate D7R22 + HSC thread M7x10 + Spacer HSCS D7 + Spring In 21.90 CHF 21.9 CHF	Base Plate Set M7 + E3D V6 Adapted M12 HS + Spring In Replacement hot-end, same height with DHB 22.5 only 39.90 CHF 39.9 CHF
Base Plate Set M7 + E3D V6 Adapted Groove HS (DHB22.5) + Spring In This Base set is a drop in replacement, to keep same Nozzle height with DHB 22.5 only It includes: Groove V6 modified HS, HSC M7 (K), Base plate D7L (M), Spring in. Pre-mounted 39.90 CHF 39.9 CHF	Ender3_V2 + Adapted HS + Spring In - HS Base Set M6 39.90 CHF 39.9 CHF	Prusa Mini DHB HS Base Set Cold Section Only in this Set. For an easy change over, the original heat sink (The most expensive part !) has been modified to integrate the Starlex DHB 22.5mm Wiring will need to be adapted for Heater (2x30W 24V) and Thermistor (NTC 100K 3950 - JST gh1.25) Plastic fan support can be reprinted, or modified, DIY 56.90 CHF 56.9 CHF	BambuLab P1P-P1S 2xMCH 30W + Thermistor Clone P1P - P1S Heater / Thermistor modified with 2x30W 24V MCH Heater ( instead of 1x 48W 24V ) 37.90 CHF 37.9 CHF