Skip to Content

BambuLab

Upgrade your nozzle swapping experience using the Starlex DHB quick nozzle swap, a perfect drop-in replacement for the BambuLab X1C and P1S - P1P printers.
No longer will you risk damaging the Heat Board by forgetting to turn off the power. Only change the nozzle itself in a few seconds.

Check available STL's on https://www.printables.com/@SWISS3DC_201859

More informations below.

Full Kit, BambuLab X1C Clone, Starlex DHB D2.5x24 Base Set, 4x HSS Nozzle Set, 2x MCH 24W 24V Heaters, 1x Thermistor NTC 100K 3950
Full kit BBL X1C + 4 HSS Nozzles included with Starlex DHB D2.5x24 Drop In Replacement 2x24W
119.00 CHF 119.0 CHF
Full Kit, BambuLab X1C Clone, Starlex DHB D3.0x24, 4x Brass Nozzle Set, 2x MCH 24W 24V Heaters, 1x Thermistor NTC 100K 3950
Full kit BBL X1C + 4 Brass Nozzles included with Starlex DHB D3.0x24 Drop In Replacement 2x24W
119.00 CHF 119.0 CHF
Full Kit, BambuLab X1C Clone, Starlex DHB D3.0x24, 4x Brass Nozzle Set, 2x MCH 30W 24V Heaters, 1x Thermistor NTC 100K 3950
Full kit BBL X1C + 4 Brass Nozzles included with Starlex DHB D3.0x24 Drop In Replacement 2x30W
119.00 CHF 119.0 CHF
Full Kit, BambuLab X1C Clone, Starlex DHB D2.5x24 Base Set, 4x HSS Nozzle Set, 2x MCH 30W 24V Heaters, 1x Thermistor NTC 100K 3950
Full kit BBL X1C + 4 HSS Nozzles included with Starlex DHB D2.5x24 Drop In Replacement 2x30W
119.00 CHF 119.0 CHF
Full Kit, BambuLab P1P-P1S Clone, Starlex DHB D2.5x24 Base Set, 4x HSS Nozzle Set, 2x MCH 24W 24V Heaters, Thermistor
Full kit BBL P1P-P1S + 4 HSS Nozzles included, 2x24W Starlex DHB D2.5x24 Drop In Replacement
119.00 CHF 119.0 CHF
Full Kit, BambuLab P1P-P1S Clone, Starlex DHB D3.0x24 Base Set, 4x Brass Nozzle Set, 2x MCH 24W 24V Heaters, Thermistor
Full kit BBL P1P-P1S + 4 Brass Nozzles included, 2x24W, Starlex DHB D3x24 Drop In Replacement
119.00 CHF 119.0 CHF
Full Kit, BambuLab P1P-P1S Clone, Starlex DHB D3.0x24 Base Set, 4x Brass Nozzle Set, 2x MCH 30W 24V Heaters, Thermistor
Full kit BBL P1P-P1S + 4 Brass Nozzles included, 2x30W, Starlex DHB D3x24 Drop In Replacement
119.00 CHF 119.0 CHF
Full Kit, BambuLab P1P-P1S Clone, Starlex DHB D2.5x24 Base Set, 4x HSS Nozzle Set, 2x MCH 30W 24V Heaters, Thermistor
Full kit BBL P1P-P1S + 4 HSS Nozzles included, 2x30W Starlex DHB D2.5x24 Drop In Replacement
119.00 CHF 119.0 CHF
Full Kit BambuLab X1C, Starlex DHB D3.0x33 Base Set, HSS+C 4 Nozzles Set, 2x MCH 24V Heaters 30W, Thermistor, adapted connectors
We surpassed a flow rate of 33mm3/s, using the same nozzle height as the original hot-end. While testing Nobufil PLAx at 240°C, we managed to hit 45mm3/s with the protruded brass nozzle, proving its remarkable melting performance!
Melting performance is very much dependent on the filament brand and quality, upto 30% difference.
139.00 CHF 139.0 CHF
Full Kit  BambuLab P1P-P1S, Starlex DHB D3.0x33 Base Set, HSS+C 4 Nozzles Set, 2x MCH 24V Heaters 30W, Thermistor, adapted connectors
We surpassed a flow rate of 33mm3/s, using the same nozzle height as the original hot-end. While testing Nobufil PLAx at 240°C, we managed to hit 45mm3/s with the protruded brass nozzle, proving its remarkable melting performance!
Melting performance is very much dependent on the filament brand and quality, upto 30% difference.
139.00 CHF 139.0 CHF
Full Kit, BambuLab Voron, Starlex DHB D3.0x24, 4x HSS+C Nozzle Set, 2x MCH 30W 24V Heaters, 1x Thermistor NTC 100K 3950 Microfit 3.0
Full kit BBL Voron + 4 HSS+C Nozzles included with Starlex DHB D3.0x24, 2x30W Heaters with Microfit 3.0 connectors
129.00 CHF 129.0 CHF
Full Kit, BambuLab Voron, Starlex DHB D3.0x27.5, 4x HSS+C Nozzle set, 2x MCH 30W 24V Heaters, 1x Thermistor NTC 100K 3950 Microfit 3.0 connectors
Full kit BBL Voron + 4 HSS+C Nozzles included with Starlex DHB D3.0x24, 2x30W Heaters with Microfit 3.0 connectors
129.00 CHF 129.0 CHF
HS BambuLab Clone Adapted Heat Sink Only (DHB24)
Compatible Heat Sink as Drop In replacement for X1C & P1P - P1S for DHB 24
23.90 CHF 23.9 CHF
HS BambuLab Clone Adapted Heat Sink Only (Special BBL DHB 27.5)
Compatible Heat Sink as Drop In replacement for X1C & P1P - P1S for DHB 24
23.90 CHF 23.9 CHF
HS BambuLab Clone Adapted Heat Sink Only (Special BBL DHB 33)
Compatible Heat Sink as Drop In replacement for X1C & P1P - P1S for DHB 24
23.90 CHF 23.9 CHF
10.70 CHF 10.7 CHF
10.70 CHF 10.7 CHF
10.70 CHF 10.7 CHF
All Swiss3Dc designed parts are made and CNC machined in Switzerland, standard parts can be imports.

The colors of the parts on the images in the shop and on the website are for differentiation purposes only.

WARNING ⚠️: Some products sold on this website can expose you to chemicals, including Mineral Oils, which is known to the State of California to cause cancer, also Lead and Nickel, that are known to the State of California to cause cancer and birth defects or other reproductive harm. More information: https://www.p65warnings.ca.gov/