%20(0.4,%2024WxL15)?unique=a26905d){kind=icon}
?unique=052b46e)
%20Sprite%20Cold%20section?unique=7fe0fc5){kind=icon}
?unique=019c049){kind=icon}
?unique=019c049){kind=icon}
?unique=019c049){kind=icon}
%20(0.4,%2024WxL15)?unique=a26905d){kind=icon}
?unique=052b46e)
%20Sprite%20Cold%20section?unique=7fe0fc5){kind=icon}
?unique=019c049){kind=icon}
?unique=019c049){kind=icon}
?unique=019c049){kind=icon}
Customizable Kit Creality Sprite S1, Starlex DHB D2.5x22.5 HSS ( Thermistor NTC 100K 3950 JST xh1.25)
Add your choice of nozzle output, 24/30W heater...
Included:
Selected Nozzle Hardened Stainless Steel
Selected MCH 24V JST 2.54 + Y connector
1x Thermistor bulb NTC 100K 3950 JST xh 1.25 connector
To print by user, plastic air flow guide (below, under "Documents")
Enjoy the especially redesigned light Heat Sink to fit a similar height (+0.8mm) with a 22.5mm melting zone nozzle, highly increasing your print speed and flow rate.
Selected Nozzle Hardened Stainless Steel
Selected MCH 24V JST 2.54 + Y connector
1x Thermistor bulb NTC 100K 3950 JST xh 1.25 connector
To print by user, plastic air flow guide (below, under "Documents")
Enjoy the especially redesigned light Heat Sink to fit a similar height (+0.8mm) with a 22.5mm melting zone nozzle, highly increasing your print speed and flow rate.
This kit is not compatible with the 3.0 Brass Nozzles
Warning D3.0 Brass & Copper nozzles will not fit into this hot-end!Documents
Terms and Conditions
14 days return, money-back guarantee
Shipping: 2-7 Business Days
Complete the Hot-end with the adapted parts below
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.