%20(0.4,%2024WxL15)?unique=9da2b6e){kind=icon}
?unique=b8888eb)
%20Sprite%20Cold%20section?unique=b8888eb){kind=icon}
%20(0.4,%2024WxL15)?unique=9da2b6e){kind=icon}
?unique=b8888eb)
%20Sprite%20Cold%20section?unique=b8888eb){kind=icon}
Customizable Kit Creality Sprite S1, Starlex DHB D3x22.5 Brass ( Thermistor NTC 100K 3950 JST xh1.25)
Add your choice of nozzle output, 24/30W heater...
2x MCH 24V JST + Y connector
1x Thermistor bulb NTC 100K 3950 JST xh 1.25 connector
+ Selected items below
To print by user, plastic air flow guide (below, under "Documents")
Enjoy the especially redesigned light Heat Sink to fit a similar height (+0.8mm) with a 22.5mm melting zone nozzle, highly increasing your print speed and flow rate.
1x Thermistor bulb NTC 100K 3950 JST xh 1.25 connector
+ Selected items below
To print by user, plastic air flow guide (below, under "Documents")
Enjoy the especially redesigned light Heat Sink to fit a similar height (+0.8mm) with a 22.5mm melting zone nozzle, highly increasing your print speed and flow rate.
This kit is not compatible with the 2.5 Hardened Stainless Steel Nozzles
Warning D2.5 HSS nozzles will not fit into this hot-end!Documents
Terms and Conditions
14 days return, money-back guarantee
Shipping: 2-7 Business Days
Complete the Hot-end with the adapted parts below
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.