Skip to Content
50%Off
  1. All Products
  2. Customizable Kit Prusa Mini DHB D2.5x22.5 Drop In Replacement kit

Customizable Kit Prusa Mini DHB D2.5x22.5 Drop In Replacement kit

https://www.swiss3dc.com/web/image/product.template/423/image_1920?unique=cd1bcb8

Boost your Prusa Mini. Add your choice of nozzle output, 24/30W heater...

For an easy change over, the original heat sink (The most expensive part !) has been modified to integrate the Starlex DHB 22.5mm
Wiring will need to be adapted for MCH Heater and Thermistor (NTC 100K 3950 - JST gh1.25)
Easiest upgrade, use a 4pins screw connector.
Always bring both MCH wires to the back horizontally, give them enough space to move freely !
Do not forget to print the STL file below.
This upgrade will greatly enhance the melt zone similar to a Volcano nozzle while preserving the original height.

Both heater wires will come to the right, behind the gap of the heat sink and the thermistor wire also to the right. The heater wires should never be locked, they must have as much freedom as possible to avoid forcing on the soldering point. 
 
No other mechanical modifications necessary.

Warning Brass & Copper nozzles will not fit into this hot-end!

145.40 CHF 145.4 CHF 145.40 CHF Tax Excluded

90.80 CHF Tax Excluded

Not Available For Sale

  • Thermistor NTC 100K 3950 bulb 1.3mm (100mm wire)
  • MCH heater quantity
  • MCH Wattage
  • MCH Heater Connector Type
  • MCH Y Harness Connector (for 2 MCH Heaters = 60W max)
  • Nozzle HSS output
  • Wires From Hot-end Microfit To Board 1m

This combination does not exist.

Contact Us
Thermistor NTC 100K 3950 bulb 1.3mm (100mm wire): Microfit 3.0 Bulb
MCH heater quantity: 2x
MCH Heater Connector Type: Microfit3.0
MCH Y Harness Connector (for 2 MCH Heaters = 60W max): Microfit3.0


Terms and Conditions
14 days return, money-back guarantee
Shipping: 2-7 Busin​ess Days​