Skip to Content
  1. All products
  2. Full Kit
  3. Full Kit BambuLab Voron, Starlex DHB D3.0x27.5, 2x30W, HSSC
  4. Full Kit
Pricelist: CHF Price list Pricelist
Pricelist: CHF Price list Pricelist

Full Kit BambuLab Voron, Starlex DHB D3.0x27.5, 2x30W, HSSC


Enjoy the quick nozzle swap in seconds without removing any screw or connector with a 27.5mm melt zone to improve your speed and flow rate.

Full kit BBL Voron + 4 HSS+C Nozzles

(Hardened Steel Nozzles need more heat than brass nozzles due to poor heat transfer, add at least 5 to 10°C for optimum melting performance)

(Not compatible with BambuLab 3D Printers)

Included:

1x BambuLab 24HS (Check for Stealthburner mount on Printables @Swiss3Dc)
1x Starlex DHB D3.0x27.5,
4x HSS+C Nozzles (0.2/0.4/0.6/0.8)
2x MCH 30W 24V Heaters Microfit 3.0
1x Thermistor NTC 100K 3950 Microfit 3.0
1x Y Harness connector Microfit 3.0

Below, printable files for the Voron Stealthburner Hot-end.
BambuLab Full Kit Drop-in Voron HB27.5 27.5mm HB D3x27.5 Kit
129.00 CHF 129.00 CHF (Tax excluded)

Add to cart
Buy now

Terms and Conditions
14 days return, money-back guarantee
Shipping: 2-7 Busin​ess Days​

This content will be shared across all product pages.

Documents
Stealthburner Back 02 Starlex DHB 27-5 BBL-V3.STEP Stealthburner Back 02 Starlex DHB 27-5 BBL-V3.STL Stealthburner Front Starlex 27-5 BBL V3.STEP Stealthburner Front Starlex 27-5 BBL V3.STL

Starlex DHB is a game changer for tool free nozzle swap in seconds.

No material leak as the extremity is located into the cold section, in the heat sink.

Experience exceptional thermal efficiency with the innovative dual heat block DHB eco-system.

Opt for standard or protruded nozzles to maximise your flow and elevate your performance.

Drop in replacement, same nozzle height

1.75mm filament

When it comes to 3D printing, the choice of nozzle can significantly impact your results.

The best compromise:

3.0mm nozzles, typically made from brass and copper, excel in thermal conductivity but may lack the abrasion resistance needed for more demanding materials. They are ideal for use with filaments like PLA and PETG.

3.0mm nozzles, Hardened stainless steel nozzles with a copper sleeve (HSSC) provide seamless compatibility with brass nozzles, both featuring a 3.0mm body diameter, allowing for effortless interchangeability. This versatility is a game-changer for any serious 3D printing enthusiast.

With a 3.0mm body diameter, these nozzles require corresponding heat blocks to be 3mm as well, ensuring optimal performance. Choosing the right pairing is essential.

------------------------

2.5mm nozzles (HSS) made from hardened stainless steel are an exceptional option. These nozzles are meticulously crafted to endure the challenges posed by abrasive filaments and high-temperature environments, ensuring reliability and performance.

The 2.5mm body diameter is not just a number; it is a carefully considered design that reduces the thermal barrier, optimising heat transfer despite the metal's lower thermal conductivity.

For those seeking consistent flow rates, a slight increase in the standard temperature by 5 to 10°C may be necessary with full hardened stainless steel nozzles, even a little more depending on the filament quality. This minor adjustment can make a significant difference in your printing outcomes.

It's important to note that while certain abrasive filaments can wear down hardened nozzles over time, the investment in high-quality stainless steel pays off in durability and performance.


Complete the Hot-end with the adapted parts below