Boost your Prusa Mini with a longer melt zone within the same nozzle height.
Drop In Replacement
Included:
Full Kit, Starlex DHB D3.0x22.5 base set
4x Brass Nozzle Set
2x MCH Heater 24W 24V Microfit 3.0
1x Thermistor NTC 100K 3950 Microfit 3.0
2 Wires Microfit 3.0 Connectors for Prusa & Voron Printers
Always bring both MCH wires to the back horizontally, give them enough space to move freely !
Do not forget to print the STL file below.
Both heater wires will come to the right, behind the gap of the heat sink and the thermistor wire also to the right. The heater wires should never be locked, they must have as much freedom as possible to avoid forcing on the soldering point.
