Skip to Content

  1. Products
  2. Brands
  3. E3D

E3D

Enhance your printing experience with the Starlex DHB hot-end, featuring exceptional thermal efficiency and a flow rate starting at 22.5mm3/s. It mirrors the capabilities of the Volcano nozzle without compromising Z height.

Most of the items below would fit E3D products. Original V6 as well as Revo standard.

CHF Price list
Sort By: Featured

E3D

Customizable Kit E3D V6 Groove HS, Starlex DHB D2.5x22.5 Base set, HSS Nozzle, 2x MCH 24V Heaters 24/30W, Thermistor
Add your choice of nozzle output, 24/30W heater...
86.90 CHF 86.9 CHF
Customizable Kit E3D V6 M12 HS, Starlex DHB D2.5x22.5 Base set, HSS Nozzle, 2x MCH 24V Heaters 24/30W, Thermistor
Add your choice of nozzle output, 24/30W heater...
86.90 CHF 86.9 CHF
Customizable Kit E3D V6 Groove HS, Starlex DHB D3x22.5 Base set, Brass Nozzle, 2x MCH 24V Heaters 24/30W, Thermistor
Add your choice of nozzle output, 24/30W heater...
89.90 CHF 89.9 CHF
HS E3D V6 M12 Adapted Heat Sink Only (DHB 22.5)
E3D V6 with M12 Heat Sink
18.90 CHF 18.9 CHF
HS E3D V6 Groove Adapted Heat Sink Only (DHB22.5)
E3D V6 Series For a Drop in Replacement hot-end, same height with DHB 22.5
17.90 CHF 17.9 CHF
HSCS D4 D6 tube Spacer
Brass tube spacer
3.50 CHF 3.5 CHF
Base Plate D4 Rounded
Rectangular Rounded Edges Stainless Steel Base Plate D4, Voron, Revo
5.90 CHF 5.9 CHF
Base Plate D7-L D22
Round Stainless Steel Base Plate D7 Lock OD 22mm
7.90 CHF 7.9 CHF
HSC for E3D M4 Revo/Hemera
Heat Sink Connector for E3D M4 systems
11.40 CHF 11.4 CHF
HSC M7 x 10 L
8.90 CHF 8.9 CHF
HSC M7 x 15
7.90 CHF 7.9 CHF
Base Plate Set M4 Revo + Spacer + Spring In
Revo M4 HSC Base Plate D4 Rounded & Tube Spacer
21.90 CHF 21.9 CHF
Base Plate Set M7S x 15 + Spacer + Spring In
M7S = Base plate D7 + HSC thread M7 + Spacer HSCS D7 + Spring
21.90 CHF 21.9 CHF
Base Plate Set M7S for E3D V6 Original HS + Spacer + Spring In
This Base Set will fit into an original V6 Heat Sink.
It will increase 7mm the Nozzle height, fan shroud will need to be adapted.
The electrical wiring will need to be adapted to support the 2x30W MCH heaters and the Thermistor (NTC 100K 3950 - JST gh1.25).
21.90 CHF 21.9 CHF
Base Plate Set Round M7S x 10 + Spacer + Spring In
M7S = Base plate D7R22 + HSC thread M7x10 + Spacer HSCS D7 + Spring In
21.90 CHF 21.9 CHF
Base Plate Set M7 + E3D V6 Adapted M12 HS + Spring In
Replacement hot-end, same height with DHB 22.5 only
39.90 CHF 39.9 CHF
Base Plate Set M7 + E3D V6 Adapted Groove HS (DHB22.5) + Spring In Cold Set
This Cold set is a drop in replacement, to keep same Nozzle height with DHB 22.5 only, any other Hot-end can also be mounted, increasing Z height and flow performance.
It includes: Groove V6 modified HS, HSC M7 (K), Base plate D7L (M), Spring in.
Pre-mounted
39.90 CHF 39.9 CHF
Nozzle V6 Brass High Flow Copper Insert
V6 nozzle with hardened nickel plated copper protruded insert for higher flow
12.90 CHF 12.9 CHF
Starlex DHB D2.5x22.5 Hot-end Base Set Only
For Hardened Stainless Steel Nozzle D2.5x22.5
63.90 CHF 63.9 CHF
Starlex DHB D2.5x24 Hot-end Base Set Only
Content:
2x HB 2.5x24;
2x HB 24 Clamp;
1x Clip 2.5;
1x Sock;

NOT INCLUDED: Nozzle, HSC, HSCS, MCH heaters, Thermistor, Base Plate...
Images are not contractual
63.90 CHF 63.9 CHF
All Swiss3Dc designed parts are made and CNC machined in Switzerland, standard parts can be imports.

The colors of the parts on the images in the shop and on the website are for differentiation purposes only.

WARNING ⚠️: Some products sold on this website can expose you to chemicals, including Mineral Oils, which is known to the State of California to cause cancer, also Lead and Nickel, that are known to the State of California to cause cancer and birth defects or other reproductive harm. More information: https://www.p65warnings.ca.gov/