Skip to Content
  1. Products
  2. By Size
  3. 22.5

22.5

CHF Price list

22.5

Full Kit Creality Sprite, Starlex DHB D2.5x22.5 HSS ( Thermistor NTC 100K 3950 JST xh1.25)
Starlex DHB D2.5x22.5 HSS Full Kit, Drop in replacement
119.20 CHF 119.2 CHF
Full Kit Creality Sprite, Starlex DHB D3x22.5 Brass ( Thermistor NTC 100K 3950 JST xh1.25)
Starlex DHB D3x22.5 Full Kit, Drop in replacement
119.20 CHF 119.2 CHF
Full Kit, Starlex DHB D2.5-22.5 Ender3_V2 Upgrade
Complete Starlex DHB 2.5-22.5 assembly
96.80 CHF 96.8 CHF
Full Kit, Starlex DHB D3.0-22.5  Ender3_V2 Upgrade
Complete Starlex DHB D3.0-22.5 assembly
96.80 CHF 96.8 CHF
Full Kit, Prusa Mini DHB D2.5x22.5 Drop In Replacement kit
110.80 CHF 110.8 CHF
Full kit, Prusa Mini DHB D3x22.5 Drop In Replacement kit
110.80 CHF 110.8 CHF
Full Kit, Starlex DHB D2.5x22.5 HSS E3D V6 HS Drop In replacement kit + 2x MCH 24V Heaters + Harness
Full Kit, Starlex DHB D2.5x22.5 HSS E3D V6 HS Drop In replacement kit
107.30 CHF 107.3 CHF
Full Kit, Starlex DHB D3x22.5 E3D V6 Groove HS Drop In replacement kit + 2x MCH 24V Heaters 24/30W + Harness
Starlex DHB D3x22.5 E3D V6 Groove HS Drop In replacement kit
105.30 CHF 105.3 CHF
Full Kit, Starlex DHB 2.5x22.5 HSS 0.4mm E3D V6 M12 HS Drop In replacement kit
119.90 CHF 119.9 CHF
Prusa Mini DHB HS Base Set
Cold Section Only in this Set. For an easy change over, the original heat sink (The most expensive part !) has been modified to integrate the Starlex DHB 22.5mm
Wiring will need to be adapted for Heater (2x30W 24V) and Thermistor (NTC 100K 3950 - JST gh1.25)

Plastic fan support can be reprinted, or modified, DIY
56.90 CHF 56.9 CHF
Nozzle D2.5x22.5 Hardened Stainless Steel
14.90 CHF 14.9 CHF
Set of 4x Nozzles D2.5x22.5 Hardened Stainless Steel
Set of 4x Nozzles D2.5x22.5mm
54.00 CHF 54.0 CHF
Nozzle D3x22.5
12.90 CHF 12.9 CHF
Set of 4x Nozzles D3x22.5 Brass
Set of 4 brass nozzles D3x22.5mm
49.00 CHF 49.0 CHF
Starlex DHB D3x22.5 Hot-end Base Set Only
Content:
2x HB 3x22.5;
2x HB 22.5 Clamp;
1x Clip 3;
1x Sock;

NOT INCLUDED: Nozzle, HSC, HSCS, MCH heaters, Thermistor, Base Plate...
Images are not contractual
87.90 CHF 87.9 CHF
DHB D3-22.5 Kit for Ender3_V2 Original D7 HS Upgrade
Keep your original heat sink and add the Hot-end Kit.
Z Height to be adjusted, fan shroud to be adapted.
105.90 CHF 105.9 CHF
All Swiss3Dc designed parts are made and CNC machined in Switzerland, standard parts can be imports.

The colors of the parts on the images in the shop and on the website are for differentiation purposes only.

WARNING ⚠️: Some products sold on this website can expose you to chemicals, including Mineral Oils, which is known to the State of California to cause cancer, also Lead and Nickel, that are known to the State of California to cause cancer and birth defects or other reproductive harm. More information: https://www.p65warnings.ca.gov/