Skip to Content

Starlex DHB Shop

Heat sink
Heat blocks
Nozzle


Heaters & connectors

Heat sink

Redefined heat sinks length are designed to accommodate the additional height introduced by the system keeping the original overall length.

Heat blocks

Heat blocks are available in three lengths: 22.5mm, 24mm, and 33mm and two diameters, 2.5 and 3mm depending on the Nozzle material. Heater & thermistor NOT included.

Nozzle

Choose the nozzle with corresponding length and diameter, in Hardened Stainless Steel, Brass or Copper.

Heaters & connectors

Choose one or two heaters for the heat blocks with the matching connectors for your printer and bulb thermistor.

  • D2.5
  • 3.0
  • D3
  • 22.5
  • 24
  • 33
  • M4
  • M6
  • M12
59.00 CHF 59.0 CHF
12.90 CHF 12.9 CHF
Set of 4x Nozzles D3x24 Brass
Set of 4 brass nozzles D3x24mm
49.00 CHF 49.0 CHF
Starlex DHB D2.5x24 Hot-end Base Set Only
Content:
2x HB 2.5x24;
2x HB 24 Clamp;
1x Clip 2.5;
1x Sock;

NOT INCLUDED: Nozzle, HSC, HSCS, MCH heaters, Thermistor, Base Plate...
Images are not contractual
90.90 CHF 90.9 CHF
Starlex DHB D3x24 Hot-end Base Set Only
Content:
2x HB D3x24;
2x HB 24 Clamp;
1x Clip D3;
1x Sock;

NOT INCLUDED: HS, HSC, HSCS, MCH heaters, Thermistor, Base Plate, Nozzle, Spring In...
Images are not contractual
90.90 CHF 90.9 CHF
All Swiss3Dc designed parts are made and produced in Switzerland, standard parts can be imports.

The colors of the parts on the images in the shop and on the website are for differentiation purposes only.

WARNING ⚠️: Some products sold on this website can expose you to chemicals, including Mineral Oils, which is known to the State of California to cause cancer, also Lead and Nickel, that are known to the State of California to cause cancer and birth defects or other reproductive harm. More information: https://www.p65warnings.ca.gov/