Full Kit, Prusa Mini Starlex DHB D2.5x22.5 base set, 4x HSS Nozzle Set, 2x MCH Heater 24W 24V Microfit 3.0, 1x Thermistor NTC 100K 3950 Microfit 3.0
Boost your Prusa Mini. Full Kit, Starlex DHB D2.5x22.5, set 4 HSS nozzles 2x24W Drop In Replacement
Always bring both MCH wires to the back horizontally, give them enough space to move freely !
Do not forget to print the STL file below.
Both heater wires will come to the right, behind the gap of the heat sink and the thermistor wire also to the right. The heater wires should never be locked, they must have as much freedom as possible to avoid forcing on the soldering point.
Do not forget to print the STL file below.
Both heater wires will come to the right, behind the gap of the heat sink and the thermistor wire also to the right. The heater wires should never be locked, they must have as much freedom as possible to avoid forcing on the soldering point.
Documents
Terms and Conditions
14 days return, money-back guarantee
Shipping: 2-7 Business Days
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.