Skip to Content

  1. Products
  2. By Size
  3. 33

33

Creality
Sort By: Featured

33

Full Kit  BambuLab X1C-P1P-P1S, Starlex DHB D3x33 Base Set, HSS+C 4 Nozzles Set, 2x MCH 24V Heaters 30W, Thermistor, adapted connectors
We surpassed a flow rate of 33mm3/s, using the same nozzle height as the original hot-end. While testing Nobufil PLAx at 240°C, we managed to hit 45mm3/s with the protruded brass nozzle, proving its remarkable melting performance!
Melting performance is very much dependent on the filament brand and quality, upto 30% difference.
139.00 CHF 139.0 CHF
Full Kit  BambuLab Voron, Starlex DHB D3.0x33 Base Set, 4x HSS+C Nozzles Set, 2x MCH 24V Heaters 60W, Thermistor, Microfit 3.0 connectors
Over 40mm3/s of flow rate, same nozzle height !
129.00 CHF 129.0 CHF
HS BambuLab Clone Adapted Heat Sink Only (Special BBL DHB 33)
Compatible Heat Sink as Drop In replacement for X1C & P1P - P1S for DHB 24
23.90 CHF 23.9 CHF
HSC for BambuLab D4 (DHB33)
X1C; P1P; P1S
10.70 CHF 10.7 CHF
Base Plate Set D4 + BambuLab Clone Heat Sink (DHB 33)
Adapted Drop In replacement parts for the cold section of the BambuLab X1C - P1P - P1S
49.90 CHF 49.9 CHF
Heat Block Clamp 33
9.90 CHF 9.9 CHF
HB Heat Block D2.5x33 Copper
D2,5 x 33mm
19.80 CHF 19.8 CHF
HB Heat Block D3.0x33 Copper
D3.0 x 33mm
19.80 CHF 19.8 CHF
Nozzle D3.0x33 Brass High Flow Variants
16.90 CHF 16.9 CHF
Nozzle D3.0x33 Brass Variants
15.90 CHF 15.9 CHF
Nozzle D3.0x33 HSS+C Variants
16.90 CHF 16.9 CHF
Set of 4 Nozzles D3.0x33 HSS+C Copper Sleeve
62.00 CHF 62.0 CHF
Nozzle D3.0x33 HSS+C Copper Sleeve Variants
15.90 CHF 15.9 CHF
Nozzle D3x33 HSS+C Copper Sleeve 0.2
21.90 CHF 21.9 CHF
Nozzle D3x33 HSS+C Copper Sleeve 0.4
17.90 CHF 17.9 CHF
Nozzle D3x33 HSS+C Copper Sleeve 0.6
17.90 CHF 17.9 CHF
Nozzle D3x33 HSS+C Copper Sleeve 0.8
19.90 CHF 19.9 CHF
Starlex DHB D3.0x33 Hot-end Base Set Only compatible with body D3.0mm for Brass & HSS+C Nozzles
Content:
2x HB 3.0x33;
2x HB 33 Clamp;
1x Clip 3.0;
1x Silicone Sock;

NOT INCLUDED: Nozzle, HSC, HSCS, MCH heaters, Thermistor, Base Plate...
Images are not contractual
73.80 CHF 73.8 CHF
Full Kit  BambuLab Voron, Starlex DHB D3.0x33 Base Set, 4x HSS+C Nozzles Set, 2x MCH 24V Heaters 30W, Thermistor, Microfit 3.0 connectors
Over 40mm3/s of flow rate, same nozzle height !
129.00 CHF 129.0 CHF
All Swiss3Dc designed parts are made and CNC machined in Switzerland, standard parts can be imports.

The colors of the parts on the images in the shop and on the website are for differentiation purposes only.

WARNING ⚠️: Some products sold on this website can expose you to chemicals, including Mineral Oils, which is known to the State of California to cause cancer, also Lead and Nickel, that are known to the State of California to cause cancer and birth defects or other reproductive harm. More information: https://www.p65warnings.ca.gov/